Use the Microsoft Wireless Display Adapter (2024)

Here are some things to know before you start using your adapter:

• The adapter works best if you have both an HDMI port and a USB charging port on your HDTV, monitor, or projector.

• This adapter needs to be connected to a USB charging port because it draws power from the USB connection.

• Make sure your Windows PC has the latest updates. For info on checking updates, go to Update Windows.

• Make sure your adapter also hasthe latest firmware. To learn how to update the firmware, seeUpdate the Microsoft Wireless Display Adapter.

There are different versions of the wireless display adapter. The cable length and dimensions are slightly different for each one.

Use this table to check if your device works with the adapter you have.

Here's how to set up your adapter on the second display:

1. Plug the HDMI end of your adapter into the HDMI port on your HDTV, monitor, or projector.

2. Plug the USB end of the adapter into a USB charging port on your second display. If your display doesn't have a USB charging port, plug the USB end into any standard USB Type-A charger with 5W (5V/1A).

3. On your second display, set the input to HDMI. Ifyou're not sure how to do this, check the manual that came with it.

Here's how to connect to your adapter on a Windows PC:

1. On your PC, press Windows logo key + K.

2. Select the name of your adapter from the list of available connections. The name is shown on your second display.

For other Miracast® enabled devices, look for Miracast or Cast in Settings and follow your device's instructions.

To change the settings for your adapter, update the firmware, and more, you'll need the Microsoft Wireless Display Adapter app. Here's how to install it from the Microsoft Store:

1. SelectStart >All Apps > Microsoft Store.

2. Make sure you're signed in with your Microsoft account.

3. In search, enterMicrosoft Wireless Display Adapter.

4. Select the app, then select Get.The app will install on your device.

Here's how to update the firmware on your adapter:

1. Connect your Windows PC to your adapter.

2. Open theMicrosoft Wireless Display Adapter app.

3. Select Update & security. If an update is available, selectUpdate. You'll need to keep the app open and stay connected to the adapter until updates are completed.

4. To keep your adapter up to date, turn on Update adapter automatically. Updates will take place when updates are available and your adapter is connected to your Windows PC.

Make it easier to recognize your adapter by changing its name. Here's how:

1. Connect your Windows PC to your adapter.

2. Open theMicrosoft Wireless Display Adapter app.

3. SelectPersonalization and enter the name you want. The change will take effect the next time you connect your adapter.

4. Disconnect and reconnect to your adapter to see the change right away.

You can prevent others from pairing with your adapter or using it without your permission. Here's how:

1. Connect your Windows PC to your adapter.

2. Open theMicrosoft Wireless Display Adapter app.

3. SelectUpdate & security and turn on Enter a PIN when connecting a new device.

Get better performance when your Windows PC and adapter are connected to the same Wi-Fi network. If you need to change the network your adapter is connected to,here's how:

1. Connect your Windows PC to your adapter.

2. Open theMicrosoft Wireless Display Adapter app and selectNetwork.

3. Choose the network you want and selectConnect.

Note:This only applies to Microsoft 4K Wireless Display Adapter.